Property education · 129 guides

Feasibility and costs

Test project numbers, contingency allowances and development costs. Each guide explains its scope; check local requirements and current official sources for your site.

• Accessible Housing: The Rule That Applies In Some States And Not Others

  Accessible housing is in the National Construction Code, but your state decides whether it applies. Get that wrong in either direction and it costs you money or a certification.

• Acid Sulfate Soils NSW: The Excavation And Dewatering Site Test

  On coastal NSW floodplains the soil under your site can turn from harmless clay into acid when you excavate or lower the watertable. Test the mapping, the depth and the disposal route before you commit to a price.

• ACT Crown Lease Purpose Clause: Check the Lease Before the Design

  In the ACT, the Crown lease can shape what may be done on a block, so a development idea needs a lease-purpose check before design money is spent.

• ACT Missing Middle Reform: Turn Canberra Infill Potential into a Disciplined Site Test

  Turn Canberra’s missing-middle reform into a disciplined site test by checking the Territory Plan, design guidance, constraints, market demand and conservative feasibility.

• Acton's Modern-Country Luxury: A Blueprint for Strategic Property Development

  Discover how Acton's modern-country luxury trend aligns with systematic property development strategies, focusing on OPM and community-driven growth for high-profit outcomes.

• Appoint Your Principal Certifier Before Anyone Picks Up a Tool

  The principal certifier cannot be appointed late, cannot be chosen by your builder, and has to inspect at stages that will already be covered up. Get the appointment and the inspection schedule right before work starts.

• BASIX Changed Your Design: Why The Certificate Must Match The Approved Plans

  In NSW the BASIX certificate is a pre-lodgement requirement that has to keep describing the building you actually construct. Here is the sequence that stops a late design change costing you a second round of approvals.

• Before Anyone Directs the Site: Set a Property Development Instruction Authority

  Define who may request, assess, approve and formally issue project instructions before informal comments create cost, delay or safety confusion.

• Before You Approve a Construction Variation: Run the Five-Impact Check

  Assess scope, cost, time, downstream effects and exit impact before a construction change quietly rewrites the feasibility.

• Before You Chase a Bigger Site: Test a Neighbour Amalgamation Properly

  Use a respectful first-pass process to see whether adjoining ownership could create value without building a feasibility on an imaginary agreement.

• Before You Choose the Cheapest Builder: Make Every Tender Comparable

  Normalise scope, exclusions, allowances and programme before a low headline price creates a false feasibility advantage.

• Before You Count the Sales: Map Settlement Cash Flow in Your Feasibility

  Model when sale proceeds can actually become available and test the debt, tax, delay and completion obligations that sit between sale and cash.

• Before You Name One Price: Build Three Development Offer Structures

  Compare price, time, conditions and control as a package so your offer responds to the vendor without abandoning feasibility discipline.

• Before You Sign a Property JV: Rehearse the Distribution Waterfall

  Walk several cash outcomes through the proposed distribution sequence so capital returns, fees, profit and losses are understood before commitment.

• Before You Trust a Services Diagram: Test Capacity, Connection and Cost

  Use a staged services pathway to distinguish nearby infrastructure from a practical, approvable and costed connection.

• Bridging Finance Property Australia: How It Works And When Investors Use It

  How bridging finance works for Australian property investors and the situations where it makes sense to use it.

• Brisbane Stormwater Easements: The Subdivision Check Before You Price the Deal

  A Brisbane subdivision can look simple until the drainage path, easement burden or lawful point of discharge changes the lot layout and cost plan.

• Building Next To A Sewer Main: The NSW Water Asset Test Before You Design

  On most NSW sites the sewer main runs through the part of the block you wanted to build on. Sydney Water must approve the building plans before your DA is consented, so test the asset position before you pay for a design.

• Bushfire Attack Level Australia: Why BAL Risk Can Change A Site Feasibility

  Learn how bushfire-prone land, BAL assessment and construction requirements can affect Australian development feasibility, design and due diligence.

• Buyers Agent Vs DIY Sourcing Australia: Which Approach Suits Your Property Strategy

  Weighing up a buyers agent against DIY property sourcing in Australia, including costs, time, and which suits different investors.

• Buying A Development Site At Auction: The Due Diligence You Cannot Do Afterwards

  An auction purchase is unconditional from the fall of the hammer, so every planning, title, service and cost question has to be answered before you bid. Here is what that means for a development site.

• Capital Or Revenue? The Tax Question That Decides What You Keep

  Whether your development profit is ordinary income or a capital gain turns on your purpose and conduct, not on the label you give it. The difference can be most of your after-tax margin.

• Changing An Approved NSW Scheme: The Section 4.55 Test Before You Rebuild

  Halfway into a NSW project the design changes. Do you modify the consent or lodge again? Since 21 March 2026 the pathways have shifted, and the choice can cost you a year of holding costs.

• Clearance Of Conditions: The Step Between WA Subdivision Approval And Titles

  In Western Australia a conditional subdivision approval is only the start. What creates the titles is the clearance of each condition by the agency named in it, and the endorsement of the plan of survey. Projects that budget for the approval but not the clearance chain are the ones that sit on holding costs.

• Comparable Sales Property Development Australia: How To Use Comps Before Trusting The Numbers

  Learn how comparable sales affect property development feasibility in Australia and how investors can use sales evidence before making offers.

• Condensation Management In NCC 2025: The Wall Cavity Rule That Moves Your Cladding Cost

  NCC 2025 tightened external wall and roof ventilation, and in climate zones 6, 7 and 8 it made a drained and ventilated cavity mandatory. Here is how to price the wall system before you buy the site.

• Construction Noise Australia: Set Working Hours That Keep Your Project Out Of Trouble

  Construction noise rules, permitted hours and neighbour complaints affect your build programme and cost. Learn the site test to run before you lodge, in NSW and Victoria.

• Contract Extension Clauses Australia: How Investors Buy More Time On A Deal

  How contract extension and settlement extension clauses work in Australian property deals, and when investors should use them.

• Demolition Permits Australia: What Investors Need Before Knocking Down A Property

  A practical guide to demolition permits in Australia and what property investors must arrange before knocking down a building.

• Depreciation Schedule Australia: Why Property Investors Should Get One Done Properly

  Why a professionally prepared depreciation schedule can materially improve an Australian investment property's tax outcome.

• Detention Or Dead Space? What Stormwater Really Costs A Small Site

  On-site detention is a cost you can budget and a land take you cannot. Before you make an offer, find out how many square metres of your site the water needs.

• Development Margin Australia: How To Know If A Deal Is Worth The Risk

  Learn how to judge development margin in Australia with conservative values, full cost allowances and simple risk checks before you commit to a deal.

• Dividing Fences When You Subdivide: Who Pays When The Old Fence Goes

  Subdividing or rebuilding on a NSW site usually means a new boundary fence. Test who contributes, what the notice must say and what happens when a neighbour will not agree.

• Erosion And Sediment Control Australia: The Site Test Before You Lodge

  Erosion and sediment control is a condition of consent that changes site works and cost. Learn the drainage and soil test to run on a development site before you lodge.

• Foreign Buyers And Development Sites: The Approval Before The Contract

  If a foreign person will take an interest in the site, the approval, the conditions and the fees belong in your feasibility before you exchange, not after.

• GST and the Margin Scheme: A Feasibility Question Before You Buy Development Stock

  GST treatment can change a development feasibility, so students need the tax question raised before price, entity and exit assumptions are locked in.

• GST Margin Scheme Property Development Australia: What Investors Should Understand

  How the GST margin scheme works for Australian property development, and what investors need to check before relying on it.

• Heritage Overlay Property Development Australia: What It Means For Your Site

  What a heritage overlay means for developing a property in Australia and how it affects design, approvals, and cost.

• Hidden Traps in NSW Low and Mid-Rise Development: How to Avoid a Bad Buy

  NSW’s Low and Mid-Rise Housing Policy creates new development opportunities, but not every site works. Learn seven costly traps to check before buying.

• In Canberra, the Extra Dwelling Carries Its Own Tax Bill

  In the ACT you vary the Crown lease to add dwellings, and that variation attracts a lease variation charge. Price it per dwelling before you assume the uplift.

• In Queensland, One Approval Is Not the End of Your Approvals

  In Queensland a reconfiguring-a-lot approval usually comes with a second permit for operational work. Get the sequencing wrong and the civil works are unlawful.

• Joint Venture Property Deals Australia: How To Structure Property Opportunities Without Doing It All Yourself

  Learn how joint venture property deals work in Australia. This guide explains roles, capital partners, deal finders, feasibility, legal agreements, risk, profit sharing and how investors can structure property opportunities safely.

• Land Banking Australia: When It Works And When It Just Burns Cash

  Learn how land banking works in Australia, the risks investors often underestimate, and when it may make sense versus when it just ties up cash.

• Land Tax On Vacant Land In NSW: The Holding Cost Before You Build

  Land tax is charged on unimproved land value you hold at 31 December and is not reduced for part-year ownership. Test the holding cost before you buy a development site in NSW.

• Melbourne’s 60 Activity Centres: How To Spot A Site Before The Market Fully Reprices It

  How property developers can assess Melbourne activity-centre opportunities using controls, walkability, lot assembly, services and feasibility.

• Native Vegetation And Tree Protection Australia: Test The Site Before You Design

  Native vegetation clearing rules and tree protection can change your development layout and approvals pathway. Learn the site test to run before you design in NSW.

• NCC 2025 Readiness: Build a Stronger Apartment Feasibility with Five Early Checks

  Build a stronger apartment or mixed-use feasibility by confirming NCC 2025 adoption, consultant inputs, design scope, cost allowances and transition risk early.

• No Money Down Property Deals in Australia: What They Really Mean

  A practical Australian guide to so-called no money down property deals, including joint ventures, feasibility, funding risk, tax, legal agreements and due diligence.

• Nobody Budgets For The Pits: Phone And Internet Costs In A New Development

  Every new lot needs fibre-ready facilities and a carrier arranged before completion, and the developer contributions come off your bottom line. Here is the pit-and-pipe test to run before you fix your feasibility.

• NSW Battle-Axe Subdivision: Test Driveway Access Before You Trust the Yield

  A rear lot can fail commercially when access width, gradients, services, manoeuvring and council controls do not support the product assumed in the feasibility.

• NSW Biodiversity Offsets: The Clearing Threshold That Changes Your Yield

  In New South Wales, clearing native vegetation above a mapped area clearing threshold can activate the Biodiversity Offsets Scheme. Test the threshold, the development footprint and the credit cost before you design.

• NSW Seniors Housing Changes: Turn Low and Mid-Rise Potential into a Real Site Test

  Test NSW seniors housing potential with discipline by confirming Low and Mid-Rise eligibility, hazards, accessible design, operating model and conservative feasibility.

• Owner-Builder Permit NSW: What A Developer Gives Up To Save A Builders Margin

  An owner-builder permit lets you supervise your own build in NSW, but it removes builder insurance cover and attaches a consumer warning to the contract when you sell. Know the limits first.

• Planning Permit Vs Building Permit Australia: Why Approval Names Matter

  Understand the difference between planning permission and building approval so a property development feasibility does not confuse land-use approval with construction approval.

• Pre-Approval Vs Feasibility Australia: Why Finance Comes Second

  Learn why property investors should run feasibility before relying on pre-approval, and how finance and deal quality fit together in Australia.

• Prime Cost Items And Provisional Sums: Where A Fixed Price Contract Is Not Fixed

  A domestic building contract can be described as fixed price and still move, because prime cost items and provisional sums are allowances rather than prices. Understanding how each allowance is defined, and how much of your contract sits behind them, is one of the cheapest risk checks available before you sign.

• Property Deal Pack Australia: How To Present A Development Opportunity Properly

  Learn how to prepare a property deal pack in Australia so a development opportunity can be reviewed properly by partners, investors or mentors.

• Property Development Contingency Australia: How Much Risk Should Your Feasibility Carry?

  Learn how to build contingency into an Australian property development feasibility and test whether a deal can absorb cost, time and revenue shocks.

• Property Development Due Diligence Australia: How To Check A Site Before You Buy

  Learn how property development due diligence works in Australia. This guide explains zoning, overlays, feasibility, services, risks, specialists and the checks investors should complete before buying a development site.

• Property Development Feasibility Australia: How To Know If A Deal Actually Works

  Learn how to read a property development feasibility in Australia before you make an offer. This guide explains costs, end values, holding costs, finance, margin, risk and the checks that show whether a deal works.

• Property Development Finance Australia: Holding Costs, Borrowing And Risk Explained

  Learn the finance and holding cost basics behind property development in Australia, including interest, borrowing, delays, contingency and risk.

• Property Development Risk Checklist Australia: What To Check Before A Deal Gets Serious

  Use this Australian property development risk checklist to understand planning, finance, cost, timing and market risks before committing to a deal.

• Queensland Infrastructure Charges Notice: Test the Charge Before You Buy

  A Queensland subdivision or small development can pass the planning idea test and still fail when trunk-infrastructure charges hit the feasibility.

• Queensland Rezoned Your Site? The Superseded Planning Scheme Clock Is Running

  When a Queensland planning scheme is replaced and your site loses density, you have a short statutory window to ask for the old scheme to be applied. Miss it and the loss is permanent.

• Queensland’s Draft Planning Policy: Find the Opportunity Without Pricing Draft Rules as Certainty

  Queensland’s draft State Planning Policy is open for consultation. Learn how to test housing, hazards, infrastructure and assessment-benchmark changes without pricing draft policy as certainty.

• Queensland’s New Housing Code: Don’t Price the 60% Site Cover Until You Run These Checks

  Learn how to test Queensland’s new Housing Code, site-cover limits and setbacks before treating a larger building envelope as development value.

• Retaining Walls And Drainage In Property Development Australia: Hidden Costs That Blow Budgets

  Learn why retaining walls and drainage often change development budgets in Australia and how investors can spot the risk early.

• Rise And Fall Clauses In Victoria And WA: What Your Contract Cannot Do

  Victoria restricts cost escalation clauses on domestic building contracts and Western Australia prohibits them outright in the covered band. Test which regime applies, the thresholds, and what happens when a variation is a change of law rather than inflation.

• Road Occupancy Licence NSW: The Approval Before Your Machines Reach The Street

  Kerb, driveway crossings, crane lifts and skip bins can all need a Road Occupancy Licence. Work out who approves what before the construction program is set.

• Seaton’s Affordable Apartment Build: Why Tenure, Funding And Staging Matter To Developers

  Renewal SA’s 42-apartment Seaton project shows how affordable tenure, funding and staged renewal affect development feasibility.

• Self Managed Super Fund Property Australia: What Investors Should Understand First

  What Australian investors need to understand about buying property through a self managed super fund before committing.

• Site Classification Under AS 2870: The Test That Decides Your Footing Budget

  A reactive clay site and a stable sand site can carry very different footing costs. The classification is a documented step, and it belongs in your feasibility, not your build.

• Site Costs Blowout Australia: Why Development Budgets Go Wrong Underground

  Why site costs are the most common source of budget blowouts in Australian property development and how investors can manage the risk.

• South Australia’s Data-Centre Fast Start: Why Early Works Still Need A Full Risk Price

  What South Australia’s new data-centre early-works exemption means for commercial developers, landowners and project feasibility.

• South Australia’s Draft Flood Mapping: Turn New Risk Signals into Smarter Site Due Diligence

  Use South Australia’s draft flood mapping as a disciplined feasibility input by separating draft rules from current law and pricing physical, design and contract risk.

• South Australia's Three Consents: Why One Approval Is Never Enough

  In South Australia an approval is not one decision. Buying or subdividing on the assumption that one consent covers everything is how deals stall at the titles office.

• Stamp Duty Strategies Australia: How Property Investors Plan For One Of The Biggest Costs

  How Australian property investors budget for and plan around stamp duty, one of the largest upfront costs in any purchase.

• Statement Of Compliance: The Victorian Step Between Approval And Titles

  In Victoria a subdivision permit is only the beginning. The plan has to be certified, the works and contributions have to be satisfied, and a statement of compliance has to be issued before the plan can be registered and titles created.

• Stop Letting Project Questions Drift: Run an RFI Decision Register

  Turn design and construction questions into owned, costed and authorised decisions before silence becomes delay or rework.

• Stop Treating Every Feasibility Assumption as a Fact

  Rank assumptions by evidence, consequence and expiry so confidence grows before commitment rather than after a costly surprise.

• Stop Trying to Rescue Every Deal: Set Your Deal-Kill Criteria First

  Decide which evidence would make you stop, redesign or renegotiate before enthusiasm turns a weak opportunity into a costly commitment.

• Stop Waiting for the Market: How Australian Property Developers Create Value

  Learn how Australian property developers move from passive waiting to disciplined action through site selection, feasibility, due diligence and risk-aware deal structures.

• Stormwater, Easements and Services: Three Site Constraints That Can Destroy Yield

  Learn how stormwater, easements and underground services can reduce development yield and increase costs before an Australian property project begins.

• Subdividing And Selling Land: Why The Main Residence Exemption May Not Follow

  Subdividing land creates separate CGT assets, and selling the vacant block usually means no main residence exemption for that land. Here is the test to run before you subdivide.

• Subdivision Property Deals Australia: What To Check Before You Buy The Block

  Learn the key checks for subdivision property deals in Australia, including zoning, lot size, frontage, services, civil costs, council approvals and feasibility.

• Swimming Pool Compliance Certificate NSW: The Pool In Your Subdivision

  A pool you keep, sell or subdivide in NSW brings a compliance certificate, a 90-day clock or a contract problem. Find out where it lands in your feasibility first.

• Tasmania's 14-Day Appeal Clock: When A Permit Is Not Yet Worth Anything

  In Tasmania a permit can be granted and still not take effect for fourteen days. Miss the deadline, or misread the servicing conditions, and the delay lands on your construction program.

• Tasmania’s Proposed 90m² Granny Flat Rule: Bigger Is Useful—If The Numbers Still Work

  How to assess Tasmania’s proposed increase in secondary-residence floor area from 60m² to 90m² without confusing a draft rule with approval.

• Tenants and Investors Navigating the 2026 Rent Hike Debate: What You Need to Know

  Explore the 2026 rent hike debate impacting Australian tenants and investors, with practical advice for navigating rising costs and policy changes.

• Termite Risk Management On A New Build: The Hidden Item In Your Site Works

  Termite protection is a code requirement with a design life, a durable notice and a maintenance obligation. Price it, document it, and hand it over properly.

• The 180-Day Cap On Your NSW Dwelling: Short-Term Rental Before You Count The Yield

  In much of NSW a non-hosted short-term rental can only run for 180 days a year under the exempt pathway. If your feasibility counted 365 nights of income, this is the assumption that has to be tested.

• The 2% Bond Before Your Occupation Certificate: SBBIS For NSW Developers

  Build apartments in NSW and a building bond can sit in front of your occupation certificate, with inspections running for up to three years after you finish.

• The Access Handle Is Where Battle-Axe Subdivisions Come Undone

  A battle-axe lot is only as good as its handle. Before you pay for a survey, check the handle width, length, servicing limit and reciprocal rights of carriageway your council actually requires.

• The Building Information Certificate NSW: The Seven-Year Shield Before You Subdivide

  A building information certificate stops a council taking action on unauthorised or unapproved building work for seven years. On a knock-down or renovation subdivision, that protection is often the difference between a clean title and a costly order.

• The Charge On The Title: Victoria's GAIC And What It Does To Your Growth-Area Feasibility

  GAIC is a one-off charge on growth-area land that can be triggered by the transfer, the subdivision or even the building permit, and it attaches to the title until paid. Price it before you make an offer.

• The DA Clock: How Long Council Actually Has To Assess Your Application

  New South Wales measures development assessment in days, and the clock stops whenever council asks for more information. Understanding that mechanism is what separates a realistic program from a hopeful one.

• The Feasibility Mistake That Hides in Your Project Timeline

  Translate approval, construction and sales time into cash-flow pressure before a slow month quietly erodes the deal.

• The Feasibility Number Your Profit Margin Does Not Show: Peak Debt

  Sequence project cash in and out to expose the maximum funding requirement, interest pressure and timing risk before commitment.

• The Long Service Levy NSW: The 0.25 Per Cent You Must Pay Before Work Starts

  NSW charges a levy on building and construction work of $250,000 or more, and the construction certificate cannot be released until it is paid. It is small, certain and easy to leave out of a feasibility.

• The Noise Clause That Kills Yield: Rail And Busy Road Sites In NSW

  If your site sits in or next to a rail corridor or on a busy road, the consent authority cannot grant consent unless the internal noise criteria are met. Test the criteria before you buy the block, because they can dictate the building, not just the glazing.

• The NSW Planning Agreement You Sign Before You Can Lodge

  In parts of NSW a development cannot be consented until a planning agreement is in place. Test the obligation, the timing and who pays the legal costs before you commit.

• The Plans Before The Titles: Works-As-Executed And Your Subdivision Certificate

  The civil works are finished and the plan of subdivision is approved, yet the titles have not issued. On most NSW subdivisions the missing item is the works-as-executed documentation the council requires first.

• The Pre-Lodgement Meeting: The Cheapest Hour In Your Development

  A pre-lodgement meeting is a short, paid conversation with council planners before you lodge a development application. On a site with a constraint or a variation, it is usually far cheaper than discovering the problem after lodgement.

• The Subdivision Certificate Is Where Your Contributions Fall Due

  Section 7.11 and 7.12 contributions are usually payable before the subdivision certificate is released, not at settlement or on completion. Sequence the cash, or the certificate stalls.

• The Substation Your Site Has To Give Up: Electricity Capacity Before You Offer

  In NSW the distributor can require transformers, switchgear and a place to put them on your land, free of cost to it. On a small infill site that footprint can cost you a dwelling.

• The Unsewered Block That Cannot Actually Be Subdivided

  On land without reticulated sewer, every new lot needs its own effluent disposal area and buffer distances. Test the soil and the boundaries before you commit.

• The Weekly Number That Keeps a Development Budget Honest: Cost to Complete

  Update committed, spent and forecast costs together so emerging overruns are visible before invoices exhaust the contingency.

• Tweaking A Victorian Permit: Secondary Consent Or A Section 72 Amendment?

  A small change to approved Victorian plans can be a quick secondary consent or a full permit amendment. Choosing the wrong route costs money, notice and time.

• Unlocking Hidden Value: How 'Lookalike' Suburbs Can Slash Your Property Costs by $30k Annually

  Discover how strategic property investment in 'lookalike' suburbs can save Australian investors $30k yearly. Learn the systematic approach to identifying high-value opportunities without large capital outlay.

• VicSmart Or Ordinary Permit? The Ten-Day Pathway And What It Costs You

  VicSmart can decide an eligible Victorian permit in ten business days with no neighbour notice. It also switches off the merits argument. Test eligibility before you brief a designer.

• Victoria Planning Overlays: The Small-Development Feasibility Check Investors Miss

  A Victorian site can have the right zone but still carry overlay controls that change design, timing, specialist reports and approval risk.

• Victoria’s 60 Train and Tram Zones: Test the Uplift and Buy with Discipline

  Turn Victoria’s train and tram zone strategy into a disciplined acquisition test covering parcel controls, services, design yield, market depth and conservative feasibility.

• Victoria’s Stronger Planning Penalties: Make Compliance a Development System, Not a Final Check

  Victoria’s stronger planning-enforcement powers apply to offences from 3 August 2026. Learn how developers can turn compliance systems into practical project risk control.

• WA’s Proposed Four-Dwelling Exemption: Turn Faster Process into a Disciplined Site Search

  WA proposes planning exemptions for up to four compliant grouped homes or apartments plus subdivision-process reforms. Learn how to screen sites without confusing faster process with guaranteed feasibility.

• WA’s R-Codes Transition Has Ended: Recheck Site Cover Before Buying An Infill Block

  A practical guide to the WA R-Codes changes applying after 10 April 2026 and the site-cover assumptions developers should recheck.

• Water and Sewer Contributions: The Charge Nobody Budgets For

  Water and sewer developer charges are calculated from equivalent tenements, density and daily flow. On a subdivision or a dual occupancy they can be five figures before a pipe is laid.

• Western Australia's Clearing Permit: The Bushland Test Before You Design

  In Western Australia, clearing native vegetation is prohibited unless you hold a permit or an exemption applies. Test the vegetation, the land use zone and the offset exposure before you let a layout assume the bushland will simply be removed.

• Western Sydney’s New Infrastructure Contribution: Price The Levy Before You Price The Land

  A practical developer guide to the expanded NSW Housing and Productivity Contribution and its effect on Western Sydney site feasibility.

• When the Feasibility Looks Good: Try to Break It

  Learn a five-shock sensitivity test for revenue, build cost, interest, timing and yield before you trust a headline margin.

• Where The Dirt Goes: Classifying Excavated Soil Before You Price Your Basement

  A basement or deep services trench produces hundreds of tonnes of soil, and how it is classified decides whether it leaves site cheaply or costs more than the concrete you are pouring. Test it before you price the dig.

• Which Feasibility Are You Trusting? Control the Versions Before You Decide

  Prevent stale prices, costs and programmes from driving a development decision by giving every feasibility a controlled evidence trail.

• Which NCC Edition Applies To Your Building Permit? The Adoption Date Trap

  NCC 2025 was published nationally, but each state decides when it applies. Get the edition and transition wrong and your design, your costs and your program shift after the plans are drawn.

• Who Runs The Site? When Your Subdivision Becomes A Construction Project

  Once construction work on your subdivision is valued at $250,000 or more, work health and safety law treats it as a construction project with a principal contractor and a written management plan. Work out who that is before the first machine arrives.

• Whole-Of-Home Energy In NCC 2022: The Budget That Prices Your Appliances Before You Build

  NCC 2022 added a second energy test alongside the star rating: a whole-of-home annual energy budget for fixed appliances. Here is how it changes your specification cost before you commit to a build.

• Why 'Forever Renters' Are Missing the Property Development Opportunity (And How to Fix It)

  Discover why Australia's 'forever renter' trend is creating a massive opportunity for property developers using OPM strategies. Learn how to build a high-profit cashflow system without large personal capital.

• Why Derelict Sydney Homes Are the New Goldmine for Smart Developers (Not Just Auction Bidders)

  Discover how savvy developers are transforming derelict Sydney homes with rotting floors into profit engines using OPM strategies. Learn the due diligence process and why this isn't just another 'fixer-upper' trend.

• Your DA May Not Approve Your Driveway

  A DA or planning approval does not always authorise a vehicle crossing in the road reserve. The approval path varies by state and road authority; in NSW, a separate Section 138 approval is commonly required.

• Your Subdivision Can Trigger a Whole-Street Upgrade

  A two-lot subdivision can carry conditions to build kerb, gutter, footpath and street lighting along the whole frontage. Price the road reserve before you sign.

• Your Subdivision Layout Fails at the Bin Truck

  Councils test whether a heavy rigid waste truck can actually service your lots. Do that test on the sketch plan, before the survey and the DA fee.

Browse all property education articles →